Table of Contents
Advertisement
D-Link Unified Access System User Manual
Installation
This section describes how to install the Switch on a flat surface or in a standard equipment
rack. It also describes how to install the optional components for the Switch.
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should
contain the following items:
1. One Switch
2. One AC power cord
3. Mounting kit (two brackets and screws)
4. Four rubber feet with adhesive backing
5. RS-232 console cable
6. One CD Kit for DWS-3000 Series Administrator's Guide and CLI Reference Guide
7. Registration card & China Warranty Card (for China only)
If any item is missing or damaged, please contact your local D-Link Reseller for replacement.
Installation Guidelines
Please follow these guidelines for setting up the Switch:
•
Install the Switch on a sturdy, level surface that can support at least 6.6 lb. (3 kg) of
weight. Do not place heavy objects on the Switch.
•
The power outlet should be within 1.82 meters (6 feet) of the Switch.
•
Visually inspect the power cord and see that it is fully secured to the AC power port.
•
Make sure that there is proper heat dissipation from the Switch and adequate ventilation
around the Switch. Leave at least 10 cm (4 inches) of space at the front and rear of the
Switch for ventilation.
•
Install the Switch in a fairly cool and dry place for the acceptable temperature and
humidity operating ranges.
•
Install the Switch in a site free from strong electromagnetic field generators (such as
motors), vibration, dust, and direct exposure to sunlight.
•
When installing the Switch on a level surface, attach the rubber feet to the bottom of the
device. The rubber feet cushion the Switch, protect the casing from scratches, and prevent
it from scratching other surfaces.
44
© 2001- 2008 D-Link Corporation. All Rights Reserved.
Advertisement
Table of Contents
