Table of Contents
Advertisement
Default D-Link Access Point Profile Settings
Table 77
shows the AP settings for the default profile. By default, when a D-Link Access Point
associates with the switch, the settings in this table are assigned to the AP upon successful AP
validation.
Table 77. AP Profile Default Settings
Radio Settings
Radio (1 and 2)
Radio 1 IEEE 802.11 Mode
Radio 2 IEEE 802.11 Mode
RF Scan Other Channels
RF Scan Interval
RF Scan Duration
Super A/G
Extended Range
Automatic Channel
Automatic Power
Initial Power
Load Balancing
Load Utilization
Maximum Clients
RTS Threshold
DTIM Period
Fragmentation Threshold
Beacon Period
Rate Sets
Supported (Mbps)
Rate Sets (Mbps)
(Basic/Advertised)
Feature
D-Link Unified Access System Default Settings
Default
On
802.11a
NOTE: If the AP operates in a regulatory domain
where 802.11a is not supported, the radio is disabled
and no mode is configured.
802.11b/g
Disabled
60 seconds
10 milliseconds
Disabled
Disabled
Enabled
Enabled
100
Disabled
60%
256
2347 bytes
10 beacons
2346 bytes
100 milliseconds
IEEE 802.1a: 54, 48, 36, 24, 18, 12, 9, 6
IEEE 802.1g: 54, 48, 36, 24, 18, 12, 11, 9, 6, 5.5, 2, 1
IEEE 802.1b: 11, 5.5, 2, 1
Atheros Dynamic Turbo 5 GHz: 108, 96, 72, 48, 36, 24,
18, 12
IEEE 802.1a: 24, 12, 6
IEEE 802.1g: 11, 5.5, 2, 1
IEEE 802.1b: 2, 1
Atheros Dynamic Turbo 5 GHz: 48, 24, 12
Default D-Link Access Point Profile Settings
203
Advertisement
Table of Contents
