Table of Contents
Advertisement
D-Link Unified Access System User Manual
Configuring Users in the Local Database
From the Local User Configuration page, you can configure additional settings for an
existing CP user in the local database.
Figure 79. Local User Configuration
Table 60
Table 60. Local User Configuration
Field
User Name
Password
User Group
Session Timeout
Idle Timeout
Configuring Users in a Remote RADIUS Server
You can use a remote RADIUS server client authorization. You must add all users to the
RADIUS server. The local database in the D-Link Unified Switch does not share any
information with the remote RADIUS database.
Table 61
clients. The table indicates both RADIUS attributes and vendor-specific attributes (VSA).
VSAs are denoted in the Attribute column and are comma delimited (vendor id, attribute id).
174
© 2001- 2008 D-Link Corporation. All Rights Reserved.
describes the fields you use to configure CP users in the local database.
Description
Enter the name of the user.
Enter a password for the user. The password length can be from 8 to 64
characters.
Assign the user to at least one User Group. To assign a user to more than one
group, press the Ctrl key and click each group.
New users are assigned to the 1-Default user group by default.
Enter the number of seconds a user is permitted to remain connected to the
network. Once the Session Timeout value is reached, the user is logged out
automatically. A value of 0 means that the user does not have a Session
Timeout limit.
Enter the number of seconds the user can remain idle before the switch
automatically logs the user out. A value of 0 means that the user does not
have an idle timeout limit.
indicates the RADIUS attributes you use to configure authorized captive portal
Advertisement
Table of Contents
