Section 3 - Con guration
From the Local Settings page, you can manually con gure the
network settings to ful ll various network environments.
Connection
If you select DHCP, the UAP acquires its IP address,
Type:
subnet mask, DNS, and gateway information
from a DHCP server.
If you select Static IP, you must enter information
in the Static IP Address, Subnet Mask, and Default
Gateway elds.
DNS
Select the mode for the DNS.
Nameservers:
In Dynamic mode, the IP addresses for the DNS
servers are assigned automatically via DHCP. This
option is only available if you speci ed DHCP
for the Connection Type. In Manual mode, you
must assign static IP addresses to resolve domain
names.
Management
The management VLAN is the VLAN associated
VLAN ID:
with the IP address you use to access the AP. The
default management VLAN ID is 1.
Provide a number between 1 and 4094 for the
management VLAN ID.
Enable VLAN:
To enable VLAN, select the Enable VLAN check
box.
To disable VLAN , clear the Enable VLAN check
box.
D-Link DBA-1210P User Manual
Access Point Local Settings
15