TRENDnet TEW-455APBO - 9dBi High Power Wireless Outdoor PoE Access Point User Manual page 32

Making Changes
The changes are directly applied in the Utility.
It does not matter if all the devices have the same IP Address. The QS Utility identifies them uniquely by their MAC
Addresses.
Updating Changes
After the necessary changes have been made, the Administrator can apply the changes to the AP. Check on the Reboot
Checkbox and click on the Update button to reboot the device.
Multiple devices can be updated all at once. Use ctrl-left click to select multiple entries or type ctrl-A to select all
entries. Click on Update button to begin the update process.
To refresh the view, use the Find button.
Pinging the Device
The QS Utility can also be used to ping a selected Device to check the connectivity.
Pg 28 of 26