Enabling Or Disabling The Log Relay Host On The Events Page; Viewing Transmit And Receive Statistics; Table 26. Log Relay Host - D-Link DWL-8500AP - AirPremier AG Wireless Switching 108 Dualband Access Point Administrator's Manual

Unified access point (ap)
Hide thumbs Also See for DWL-8500AP - AirPremier AG Wireless Switching 108 Dualband Access Point:
Table of Contents

Advertisement

Enabling or Disabling the Log Relay Host on the Events Page

To enable and configure Log Relaying on the Events page, set the Log Relay options as
described in
Table

Table 26. Log Relay Host

Field
Relay Log
Relay Host
Relay Port
NOTE: To apply your changes, click Update. Changing some access point settings
might cause the AP to stop and restart system processes. If this happens,
wireless clients will temporarily lose connectivity. We recommend that you
change access point settings when WLAN traffic is low.
If you enabled the Log Relay Host, clicking Update will activate remote logging. The access
point will send its kernel messages real-time for display to the remote log server monitor, a
specified kernel log file, or other storage, depending on how you configured the Log Relay
Host.
If you disabled the Log Relay Host, clicking Update will disable remote logging.

Viewing Transmit and Receive Statistics

The Transmit/Receive page provides some basic information about the current access point
and a real-time display of the transmit and receive statistics for the Ethernet interface on the
access point and for all VAPs on the radio interface (and for both radio interfaces on the DWL-
8500AP). All transmit and receive statistics shown are totals since the access point was last
started. If you reboot the AP, these figures indicate transmit and receive totals since the reboot.
26, and then click Update.
Description
Choose to either enable or disable use of the Log Relay Host.
If you select the Relay Log option, the Log Relay Host is enabled and the Relay
Host and Relay Port fields are editable.
Specify the IP Address or DNS name of the remote log server.
Specify the Port number for the syslog process on the Relay Host.
The default port is 514.
9 Viewing Access Point Status
Viewing Transmit and Receive Statistics
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-3500ap

Table of Contents