NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 22

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
• Left and Right Detachable Antenna
The WG302 provides two detachable antenna.
• Restore to Factory Defaults Button
The restore to default button located between the Ethernet RJ-45 connector and the power
socket restores the WG302 to the factory default settings.
• Serial Console Port
Male DB-9 serial port for serial DTE connections.
• RJ-45 Ethernet Port
Use the WG302 Ethernet RJ-45 port to connect to an Ethernet LAN through a device such as a
hub, switch, router, or POE switch.
• Power Socket
This socket connects to the WG302 12V 1.2A power adapter.
2-8
July 2005 v3.0
Introduction