NETGEAR WG302 - 802.11g ProSafe Wireless Access Point Reference Manual page 109

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302
[get set del keyword
--- --- --- ---------------------- -------------------------------
X] [X] [X] wlan
[X] |-version
[X] [X] |-radio
[X] [X] |-wirelessmode
[X] [X] |-channel
[X] [X] |-rate
[X] [X] |-ssid
[X] [X] |-ssidsuppress
[X] [X] |-power
[X] [X] |-antenna
[X] [X] |-fragmentationthreshold--wireless fragmentation
[X] [X] |-rtsthreshold
[X] [X] |-beaconinterval
us)
[X] [X] |-dtim
interval
[X] [X] |-preamble
|
[X] [X] |-super
[X] [X] |-wirelessisolate
[X] [X] |-operationmode
[X] [X] [X] |-remoteap
[X] [X] [X] | |-p2p(+ap)
[X] [X] [X] | |-p2mp(+ap)
[X] [X] [X] | | |-1
[X] [X] [X] | | |-2
[X] [X] [X] | | |-3
[X] [X] [X] | | `-4
[X] [X] [X] | `-repeater
[X] [X] [X] |
[X] [X] [X] |
[X] [X] [X] |
Command Line Reference
--wireless setting
|-1
|-2
|-3
July 2005 v3.0
Description
--wireless driver version
--enable wireless radio
--wireless mode
--wireless channel (depends on
country and wireless mode)
--wireless transmission date rate
--wireless network name (1-32 chars)
--wireless SSID broadcast suppress
--wireless transmit power
--wireless antenna selection
threshold (even only)
--wireless RTS/CTS threshold
--wireless beacon period in TU(1024
--wireless DTIM period in beacon
--wireless preamble (only effect on
802.11b
rates)
--enable wireless super-A/G mode
--wireless isolate communication
between clients
--wireless operation mode
--wireless remote AP(s) (depends on
operationmode)
--remote AP address for p2p mode
--remote AP address for p2mp mode
--1st remote AP address for p2mp mode
--2nd remote AP address for p2mp mode
--3rd remote AP address for p2mp mode
--4th remote AP address for p2mp mode
--remote AP address for repeater mode
--1st remote AP address for repeater
mode
--2nd remote AP address for repeater
mode
--3rd remote AP address for repeater
mode
C-3