Table of Contents
Advertisement
HDTV Support
Use HDTV Support when your CRT or DFP device supports one or more
HDTV modes that are not initially listed in the Displays Manager due to an
incomplete EDID. Selecting one or both of the HDTV modes adds them to
the Force button located in the Displays Manager when the associated
display is selected.
If you have a CRT and DFP device and want both to support HDTV, you
must go to both HDTV Support pages and select both Add 720p check
boxes.
WARNING!: Forcing a display mode that exceeds its EDID
limits may result in permanent damage to your display!
Add 720p mode to the Displays Manager Force button
If the Predefined and Custom HDTV Formats list box is empty you can
add a format.
1
From the Tree View pane, expand Digital Panel Properties.
2
Click HDTV Support.
3
Click Add 720p standard format to the Displays Manager.
WARNING!: This option is only intended for displays that
report incomplete or incorrect EDID information. Adding
this setting could damage your digital flat panel display.
USE WITH CAUTION!
Add an HDTV format
The Predefined and Custom HDTV Formats list box should list any
standard and optimized HDTV formats supported by the digital panel's
EDID. If the list is empty, then no HDTV formats are natively supported.
1
From the Tree View pane, expand Digital Panel Properties.
2
Click HDTV Support.
3
Select either 720p in HDTV modes supported by this display.
HDTV Support 37
Advertisement
Table of Contents
