Force changes to a specific display setting
You can force the Catalyst
required, or not allowed, by a specific application.
1
From the Tree View pane, click Displays Manager.
2
Click the Force button.
3
Use the mouse to cursor over to the display feature to force.
4
Highlight and then click the required setting.
Apply your settings
1
Click Apply to save your changes and leave the Catalyst
Center open.
2
Click OK to save your changes and exit the Catalyst
Center.
Discard your settings
• Click Discard to ignore any unsaved changes and restore the
settings that existed when the Catalyst
opened or the last time Apply was used. Discard does not close the
™
Catalyst
Control Center.
Note: Clicking Discard applies to all features of an aspect, not just
the feature in the current view.
Display Options
The Display Options aspect gives you additional control to optimize
performance of OpenGL
Use 3D Refresh Rate Override to set a refresh rate of your choice when a
full-screen application or game has a default refresh rate that is lower than
optimal.
Choose one of the Display Detection Options to prevent screen flicker
when detecting a display.
If you are using an older TV or one that has non-standard inputs that may
not be automatically detected, use Force TV Detection. When a TV is
detected using this method, it appears in the Displays Manager aspect and
can be configured as required. However, some features that rely on
automatic detection, such as extended desktop, will not be supported.
™
Control Center to override the display settings
®
®
and Direct 3D
applications.
Display Options 27
™
Control
™
Control
™
Control Center was