Table of Contents
Advertisement
ATI HDTV Cable
Backplate of the ATI Graphics Card
Male RCA Patch Cables – available from consumer electronics dealer
Typical HDTV Video Input Connections
Note: Input and output cables lengths should not exceed 50 feet
(15m).
Installing your ATI HDTV video cable
1
Turn on your component input device, and set it to YPbPr input.
Note: See your HDTV or component input device manual for
configuration information specific to your device.
2
Turn on your computer.
Note: Your TV will not display anything until Windows starts. This
can take several minutes.
Using Your ATI HDTV Video Cable
Use the HDTV Video Cable to watch DVD movies and play video games
on your High Definition Television.
Copy-protected DVDs restrict playback to 480i and 480p modes.
For maximum performance when you watch DVD movies or play
computer games on your HDTV, you should find the mode and screen
resolution that provide the best result on your TV, and use those settings
exclusively.
To change HDTV display settings
1
Click the Windows Start button, point at Settings , and then click
Control Panel
2
Double-click the Display icon, click the Settings tab, and use the
Screen Area
Note: If the resolution you select is not related to a timing, the
.
slider to select the resolution you want.
Introduction 43
Advertisement
Table of Contents
