Table of Contents
Advertisement
50 All Settings
All Settings
The All Settings page combines all of the principal 3D features onto a
single page, without any preview window, allowing for quick access and
adjustment. You can change the settings for the following 3D features as
you normally would on each feature's own page:
• Anti-aliasing
• Anisotropic filtering
™
• Catalyst
• Mipmap detail level
• Wait for display refresh
• Adaptive Anti-Aliasing
This page is useful when it is not necessary to preview the adjusted settings
because the effect is already known or understood.
Set the Anti-aliasing preference manually
1
From the Tree View pane, expand 3D.
2
Click All Settings.
3
Ensure the application override is disabled. To do so, make sure the
Let the Application Decide check box is cleared. The slider control
will become available.
4
Click the Control slider and move the selector to your preferred
setting:
• To increase processing performance, move the slider to the left.
• To increase image quality, move the slider to the right.
Set the Transparent Anti-Aliasing
1
Expand 3D in Advanced View.
2
Click All Settings.
3
Ensure the application override is enabled. To do so, make sure the
Let the Application Decide check box is selected.
4
Click Transparent Anti-Aliasing.
Note: The slider control becomes unavailable.
A.I.
Advertisement
Table of Contents
