Monitor Configuration - ATI Technologies V7350 - 100-505143 FireGL 1GB 512-bit GDDR3 PCI Express Video Card User Manual

7
When the Setup complete message appears, select Yes, I want to
restart my computer now

Monitor Configuration

Once the drivers and software have been installed, you can configure your
monitor.
Warning
damage your monitor. Consult your monitor's documentation if
necessary.
To configure your primary display
1
Navigate to the Control Panel and choose Display, or right-click on
the desktop and choose Properties.
2
Choose the Settings tab and select the screen resolution and color
depth that best suit your requirements and your monitor's
performance.
3
Click Advanced and select the Monitor tab.
4
Choose a refresh rate from the drop-down list.
5
Click OK to return to the desktop.
To set up a multi-monitor display
1
From the Start menu click Control Panel , then Display . Click the
Settings tab to access the basic multi-monitor configuration settings.
Note: ATI software provides many additional configuration features
that can be accessed by clicking the Advanced button from the
Display Properties > Settings
2
Select the Monitor icon identified by the number 2 .
3
Click Extend my Windows desktop onto this monitor .
4
Set the Screen Resolution and Color Quality as appropriate for the
second monitor. Click Apply or OK to apply these new values.
• Refer to your Windows® online help and documentation for
further information on using the Settings tab.
5
Repeat steps 2 through 4 for each additional monitor beyond 2.
and click Finish .
- Choosing a refresh rate unsupported by your monitor may
tab.
Monitor Configuration 13