Monitor Configuration - ATI Technologies X3-256 - 100-505096 FireGL 256MB AGP 4x/8x Dual DVI Graphics Card User Manual

8
After the system reboots, the Found New Hardware message may
display the Digital Signature Not Found message. Click Yes or
Continue to complete the driver installation.

Monitor Configuration

Once the drivers and software have been installed, you can configure your
monitor.
To configure your primary display
1
Navigate to the Control Panel and choose Display or right-click on
the desktop and choose Properties .
2
Choose the Settings tab and select a screen resolution and color
depth that best suit your requirements and your monitor's
performance.
3
Click the Advanced button and select the Monitor tab.
4
Choose a refresh rate from the drop-down list.
WARNING
may damage your monitor. Consult your monitor's documentation if
necessary.
5
Click OK until you return to the desktop.
To set up a multi-monitor display
1
From the Start menu click Control Panel , then Display . Click the
tab to access the basic multi-monitor configuration settings.
Settings
Note: ATI software provides many additional configuration features
that can be accessed by clicking the Advanced button from the
Display Properties > Settings
2
Select the Monitor icon identified by the number 2 .
3
Click Extend my Windows desktop onto this monitor .
4
Set the Screen Resolution and Color Quality as appropriate for the
second monitor. Click Apply or OK to apply these new values.
• Refer to your Windows online help and documentation for
further information on using the Settings tab.
- Choosing a refresh rate unsupported by your monitor
tab.
Monitor Configuration 17