Table of Contents
Advertisement
6 Connecting Display Devices
5
Locate the appropriate slot and, if necessary, remove the metal back-
plate cover.
6
Align your ATI graphics card with the slot and press it in firmly until
the card is fully seated.
7
Connect the power cable to the 6-pin power connection on the
graphics card.
8
Screw in or fasten the graphics card securely. Make sure the cables
are not interfering with anything inside the computer (for example, a
cooling fan) and replace the computer cover.
9
Reconnect any cables you have disconnected and plug in the
computer's power cord.
10
Turn on the monitor, and then your computer.
Connecting Display Devices
The following connections are available:
FireGL™ Baseplate Connections
DVI-I Connection (Supports dual-link output and HD Component
Adapter)
Stereographics Connection
DVI-I Connection (Supports dual-link output)
Your FireGL™ card can connect one or two monitors, either DFP/digital
CRT or analog VGA. It can also connect a stereographics device.
You will need to use an adapter to connect analog VGA devices to the
DVI-I connections.
Advertisement
Table of Contents
