Table of Contents
Advertisement
Display Modes
• DIP switch 3 is always OFF (540p is not supported)
• Set all DIP switches ON that correspond to the modes that your
component input device supports; for further details, consult the
manual for your component video input device.
The six DIP switches on the ATI HDTV Component Video Adapter enable
four, standard HDTV video modes: 480i, 480p, 720p,and 1080i. The
default setting is 480i or 480p, depending upon your component input
device. In the example below, 480i, 480p, and 1080i are supported.
Use a small, flat-head screwdriver to set the switches - the up position is
ON, and the down position if OFF. Set the switches ON for all modes that
your HDTV or component input device supports.
Aspect Ratio
If your display supports 16:9 aspect ratio, set DIP switch 6 (16:9) ON. This
switch toggles between 4:3 and 16:9 - OFF is 4:3.
In the above example, the component input display supports 480i, 480p,
1080i, and 16:9.
Using Your ATI HDTV Component Video
Adapter
Use the HDTV Component Video Adapter to watch DVD movies on your
High Definition Television.
Using Your ATI HDTV Component Video Adapter 33
Advertisement
Table of Contents
Need help?
Do you have a question about the V7350 - 100-505143 FireGL 1GB 512-bit GDDR3 PCI Express Video Card and is the answer not in the manual?