Using Tools; Using The Tools; Select Proper Tool; Attach Tools - Hoover U8341 Owner's Manual

Using the tools

Tools allow for cleaning surfaces above
the floor and for reaching hard to clean
areas. The cleaner is ready for tool use
when the handle is in the upright posi-
tion.
Note: When handle is in upright posi-
tion, agitator brush roll is automatically
OFF.

Attach tools

All tools attach in the same
22
manner.
Tools may be attached to the telescop-
ing handle/wand or directly to the
hose (see Fig. 23).

Select proper tool

B
A
D
Select the proper tool for the
20
cleaning task.
A. Dusting brush use for carved furni-
ture, table tops, books, lamps, lighting
fixtures, venetian blinds, baseboards,
shutters, and registers.
B. Furniture nozzle use for upholstered
furniture, draperies, mattresses, clothing,
automobile interiors, and carpeted stairs.
C. Powered pet hair cleaning tool use
for upholstered furniture, carpeted stairs
and hard to reach places.
D. Crevice tool use in tight spaces, cor-
ners and along edges in such places as
dresser drawers, upholstered furniture,
stairs, and baseboards.
E. Soft Touch™ floor brush (some
models) use on hard surface floors.
Attach tool to wand or hose by
23
pushing it firmly onto the end of
the wand or hose. Twist tool slightly
to tighten or loosen the connection.
For optimum performance of the pow-
ered pet hair cleaning tool, attach it
directly to the hose.
The hose can be removed from the
handle grip by depressing the button
and pulling away from the wand. (Fig.
5)
F
C
G
E
F. Telescoping handle/wand can
21
be extended by depressing the
button (G) and pulling wand outward.
Release button to lock into position.
Shorten the telescoping handle/wand by
depressing the button and pulling wand
back.
TagAlong™ grip
When using cleaning tools, the
24
cleaner can go with you. Place
hand under the Tag Along™ grip (A),
tilt cleaner back on rear wheels and
pull.
(Cont'd)
A
09