Preparing To Install - Yamaha TOOLS for MY16-mLAN Installation Manual

mLAN Tools 2.0 and mLAN Applications for YAMAHA
mLAN Tools 2.0 software includes a driver that enables you to connect mLAN devices to a computer.
mLAN Applications for YAMAHA enables audio and MIDI signals to be transferred between a
computer and mLAN devices via mLAN cables.
This software enables you to connect the i88X, mLAN16E, MY16-mLAN, or 01X to a computer via
mLAN. 01X users should uninstall the older version of the mLAN software before installing this
software. (Refer to the 01X Installation Guide.)
Follow the steps below to install these software applications.
• For explanations on error messages, see page 43.

Preparing to install

1
Disconnect all MIDI cables that connect MIDI
devices to MIDI IN/OUT connectors on the
mLAN device.
2
Using an IEEE1394 (FireWire/iLink) cable,
connect the mLAN device directly to the com-
puter (without using a hub), and disconnect all
other IEEE 1394-connected devices from the
computer.
3
Make sure that the power to the mLAN device
is turned off.
4
Start the computer and log in to the Adminis-
trator account.
• If you are using the S200 data transfer rate stan-
dard (check the rear panel of your particular
device, or refer to the specifications in the owner's
manual), make sure to uninstall the old version of
mLAN Tools beforehand. For more information on
uninstalling the software, refer to the owner's
manual for the corresponding device.
TOOLS for i88X/mLAN16E, TOOLS for MY16-mLAN, Plug-in Effect
5
Select [Start] ➝ [Control Panel]. If the control
panel appears as shown below, click "Switch
to Classic View" in the upper left of the win-
dow.All control panels and icons will be dis-
played.
Proceed to the next step.
Installation Guide
9