Table of Contents
Advertisement
DJ68-00092B-EN
12/29/01 9:19 AM
THERMAL CUT-OUT PROTECTION
The vacuum cleaner is provided with a self-resetting thermal cut-out protection which automatically shut
off current on over heating. Overheating can be caused by blockage in the filter, nozzle, tube or hose.
After removing the cause and cooling the motor, vacuum cleaner automatically start again.
USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be
cleaned.
Select the carpet indicator ➀ when cleaning carpets.
Select flat surface indicator ➁ when cleaning the floors, tiles, etc.
FOR UNIVERSAL BRUSH
Use the floor nozzle for cleaning all surfaces.
NOTE:
For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
Page 8
CAUSE
No power supply.
Filter, nozzle, suction hose
or tube is blocked.
Check that the cord is not
twisted or wound unevenly.
7
REMEDY
Check cable, plug and
socket.
Remove the object.
Pull the cord out 2~3m &
push down the cord rewind
button.
DJ68-00092B REV(0.1)
Hide quick links:
Advertisement
Table of Contents
