(Sv-M35K Only); Intelligent Picture Control; Intelligent Picture Control (Sv-M35K Only); Selecting The Colour Mode - Samsung SV-M35K Instruction Manual

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1 During playback, press the MENU button on the
remote control.
Result: The programming menu is displayed.
➛ ❿
2 Press the corresponding , or , buttons to
❷
select the USER SET option.
PROG OPTIONS OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿
OK END: MENU
❷
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or ❷ buttons, until the
IPC option is selected.
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
NICAM :ON
IPC :ON
❿
❷ END: MENU
❿
5
Press the button to select the IPC (intelligent
picture control) option.
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
6
To adjust the sharpness manually, press the ❷
button to turn the IPC mode OFF.
➛ ❿
7
Press the or buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
8
On completion, press the MENU button again.
Intelligent Picture Control

(SV-M35K Only)

The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the IPC button on the
remote control.
2
Press the ❷ button to turn the IPC (intelligent
picture control) option ON and OFF.
When intelligent picture control mode is ON, the
sharpness of the image is adjusted automatically.
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
-------- * -----
➛❿
ON/OFF:
❷
3
To adjust the sharpness manually, select intelligent
picture control mode OFF.
The horizontal picture adjusting appears.
➛ ❿
4
Press the or buttons until the picture is
displayed according to your preferences.
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
5
On completion, press the IPC button again.
ENG-20

Selecting the Colour Mode

Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the VCR.
When you playback an NTSC-recorded tape
on this VCR make a setting on the colour
system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
➛ ❿
2 Press the corresponding , or , buttons to
❷
select the USER SET option.
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding or ❷ buttons, until the
COLOUR SYSTEM option is selected.
❿
5
Press the button to select AUTO PAL
SECAM MESECAM B/W NT4.43
NTPB.
AUTO When playing back a cassette, the system
standard is automatically selected by the
VCR.
B/W Black and White
6
On completion, press MENU twice to exit the menu.

Selecting the Audio Output Mode

(SV-M625K Only)

When monitoring a TV programme or playing back a Hi-
Fi recorded video tape, press the AUDIO button to select
a desired sound output. As the AUDIO button is pressed,
the sound output and the indicator change as below:
Sound
Stereo Bilingual
type
sound sound
OSD
display
Heard in Channel I (MAIN)
stereo. (left
heard from the
L R
channel and left speaker,
right channel) channel II (SUB)
heard from the
right speaker.
Left channel Channel I (MAIN)
heard from both heard from both
L
the lef and right
the left and the
speakers. right speakers.
Right channel Channel II-(SUB)
heard from heard from both
both the left
the left and the
R
and right right speakers.
speakers.
Sound mixed the left and right channels,
MIX
and the normal audio track.
Heard in Channel I (MAIN)
monaural. heard from both
the left and the
MONO
right speakers.

Selecting the Audio Mute Mode

(SV-M85K/SV-M35K Only)

You can select the mode in which the sound is mute.
To select the audio mute mode on and off, simply press
the AUDIO button on the remote control.
ENG-21
Standard
sound
broadcast
Heard in
monaural.
Heard in
monaural.
Heard in
monaural.
Heard in
monaural.