Table of Contents
Advertisement
NICAM *(SV-665X/SV-660X
NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 32.
1
Press MENU on the remote control.
Result!
The programming menu is displayed.
2
Press the corresponding a, w or 4, > buttons to select the
USER SET option.
3
Press the OK button to select this option.
Result!
The USER SET menuis displayed.
4
Press the corresponding a or w buttons, until the NICAM option
is selected.
Press < or P, until
Mono mode
OFF is displayed.
OFF: Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode
ON is displayed.
ON: Normally set at this position.
6 — Oncompletion, press MENU twice to exit the menu.
EPSPS
AHA OSORIO
ISEESEE SSUES ALL ETN
ER TEESE LALIT
.
oe SSeS
-
Advertisement
Table of Contents
