Vcr Plus+ Recording (America Only) - Samsung SV-7000W Owner's Instructions Manual

VCR Plus+ Recording (AMERICA Only) ]
AT _ EXIT:{TIMER)
VCR Plus+ selects programs to be recorded with a Plus Code
number, usually found in most of the program listings. Before using
VCR Plus+, you must set up your Guide Channel
Set clock first (page 77).
1 To enter a Plus Code, press the TIMER button.
Press the • and ,) buttons to select "VCR Plus".
2 Locate the program's Plus Code in a local TV program guide.
Press up to e{ght number buttons to set the Plus Code. Use _, to
correct any mistakes.
3 Press OK to save the code. The channe{ number appears on the
left side, The start and end recording times, recording date and
speed also appear.
4 Press MENU to finish. Check whether there is enough Lime left on
the video tape to record the program.
5 To stop a Timer Recording, press the VCR POWER button. When
using a cable decoder box, make sure the decoder box is on.
CODE :0 -9 CORRECT :4
COMPLETE :OK END: (MENU)
DLOCK: 10/JUL SAT 4:21P
CH DAY STA]ZT J STOP
• 16 FRI6 7;30PJ 8:00P_._
DELETE: {CLR/RST) {MENU}