Presetting The Stations Manually; Clearing A Preset Station; Changing The Preset Station Table - Samsung Sv-M35K Instruction Manual

Presetting the Stations Manually

You do not need to preset the stations manually if
you have already set them automatically.
To enable the VCR to decode a scrambled TV
station, the decoder must be switched on.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2 , ➛ ❿
Press the corresponding or , buttons to
❷
select the INSTALLATION option.
3
Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding or buttons, until the
❷
MANUAL SET UP option is selected.
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
❿
❷ END: MENU
❿
5
Press the button to select MANUAL SET UP option.
Result: The TV STATION TABLE menu is displayed.
** TV STATION TABLE **
PR CH SYSTEM
1 002 B/G/D/K
2 --- B/G/D/K
3 --- B/G/D/K
4 --- B/G/D/K
5 --- B/G/D/K
❿
SWAPPING: OK
❷
DELETE: CLR/RST MENU
6
Press the or buttons to select a programme
❷
number as required.
❿
7
Press the button to preset the station.
Result: The MANUAL TUNING menu is displayed.
** MANUAL TUNING **
PR : 1
CH : ---
SYSTEM : -
MFT : -
➛❿
❷ MEMORY: OK
MENU
8
Press the corresponding or buttons, until the
❷
CH is selected.
➛ ❿
Press the or buttons to start scanning.
Result: The frequency band is scanned and the
first station found is displayed.
If you know the number of the channel you want,
press the numeric buttons on the remote control for
example, for channel 04, first press "0" and then
press "0", "4" (see page 31).
9 If you... Then...
Wish to store the Press the corresponding
station displayed buttons, until the MFT is
❷
selected.
➛ or ❿
Press the
adjust the picture, if necessary.
Press OK to store the station
Do not wish to Press the corresponding
store the station ❷ buttons, until the CH is
displayed selected.
➛ or ❿
Press the buttons to
go on scanning the
frequency band and display
the next station
Go back to the beginning of
Step 9
10
Repeat this procedure from Step 6 onwards, until
all the required stations have been stored.
11 On completion, press the MENU button three times
to exit the menu.
ENG-14

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
3
, Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
buttons to
MANUAL SET UP option is selected.
❿
5 Press the button to select this option.
Result: The TV STATION TABLE menu is
,
displayed.
6 Press the corresponding
required preset TV station (PR) is selected.
7
Press the CLR/RST button.
8
Repeat the same procedure from Step 6 onwards
until all the required stations have been cleared.
9
On completion, press the MENU button three times
to exit the menu.

Changing the Preset Station Table

You can rearrange the Station Table and give different
programme numbers to the stations listed according to
your own preferences.
1 Press the MENU button on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the INSTALLATION option.
➛ ❿
,
or , buttons to
❷
3 Press the OK button to select this option.
Result: The INSTALLATION menu is displayed.
4
Press the corresponding
MANUAL SET UP option is selected. And then
❿
or ❷ buttons, until the press the button to select this option.
Result: The TV STATION TABLE menu is displayed.
** TV STATION TABLE **
PR CH
1 002
2 ---
or buttons, until the
❷ 3 ---
4 ---
5 ---
SWAPPING:
❷
5
Press the corresponding
required preset TV programme is selected.
Result: The selected station is displayed at the
same time on the television screen.
** TV STATION TABLE **
PR CH
1 ---
2 ---
3 002
4 ---
5 ---
SWAPPING:
❷
6 To change the programme number assigned to a
station press the OK button on the remote control.
(For example, To move a TV station in programme
1 to programme 3)
7
Press the or ❷
position. And then press OK again to swap the
position.
8
You can modify this station by repeating the same
procedure from Step 5 onwards.
9 On completion, press the MENU button three times
to exit the menu.
ENG-15
➛ ❿
,
❷ or , buttons to
or buttons, until the
❷
SYSTEM
B/G/D/K
B/G/D/K
B/G/D/K
B/G/D/K
B/G/D/K
OK
MENU
or buttons, until the
❷
SYSTEM
B/G/D/K
B/G/D/K
B/G/D/K
B/G/D/K
B/G/D/K
OK
MENU
buttons to select required