Table of Contents
Advertisement
Using the TV Buttons on the Remote Control (SV-G85K Only)
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
VCR STANDBY/ON
TV STANDBY/ON
below.
SLOW
1
1
Switch your television on.
SHUTTLE
V-LOCK
2
Point the remote control towards the television.
2
CLR/RST
F.ADV
INDEX
-/--
3
Hold down the TV button and enter the two-figure code
2
SELECT
TV
VCR
INPUT
corresponding to the brand of your television, by pressing the
REPEAT
appropriate numeric buttons.
Brand
CLR/RST
F.ADV
INDEX
-/--
SAMSUNG
SELECT
TV
VCR
INPUT
3
AKAI
5
REPEAT
GRUNDIG
4
LOEWE
AUDIO
DISP./
VOL
PROG/TRK
PANASONIC
5
Result:
TV
VCR
INPUT
REPEAT
6
AUDIO
DISP./
VOL
PROG/TRK
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
6
You can then control the television using the following buttons.
Button
TV
VCR
INPUT
TV STANDBY/ON
REPEAT
AUDIO
DISP./
TV or VCR
VOL
PROG/TRK
7
-/--
INPUT
+
–
VOL
or
PROG/TRK
($ or ❷)
DISP./
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
36
Codes
Brand
Codes
01 to 06
PHILIPS
02, 20, 22
09, 23
SABA
13, 14, 22 to 24
09, 17, 21
SONY
15, 16
02
THOMSON
13, 14, 24
08, 23 to 27
TOSHIBA
07, 16 to 19, 21
If your television is compatible with the remote control, it
is switched off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
Function
Used to switch the television on and off.
Used to switch between the TV and VCR modes.
+
–
Only the VOL (
or
) and TV STANDBY/ON
buttons are operational in VCR mode.
Used to enter a two-figure programme number.
Example: For programme 12, press -/-- followed
by numeric buttons 1 and 2.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required programme.
Used to switch between an external source and
the television tuner.
Auto Power Off
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
$
❷
option.
EASY OPERATION
3
Press the OK button to select this option.
Result:
The
menu is displayed.
EASY OPERATION
4
Press the corresponding
or
buttons, until the
$
❷
AUTO POWER OFF
option is selected.
5
Press the ❿ button, until you select the time of Auto Power off
interval.
OFF
2HOUR
3HOUR
6
On completion, press MENU twice to exit the menu.
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
or ➛, ❿ buttons to select the
Press the corresponding
,
$
❷
option.
USER SET
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
or
buttons, until the
ECO. MODE
$
❷
is selected.
5
Press the ❿!button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the VCR STANDBY/ON
(STANDBY/ON) button again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
PROG
OPTIONS
INSTALL
BONUS
CLOCK
BONUS
LANG
EASY OPERATION
➛❿!!
OK
END:
MENU
$ ❷!!
BONUS
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
NO. OF
INTERVAL REPEAT : 5
GB
❿
$ ❷
END:
MENU
PROG
OPTIONS
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿!!
OK
END:
MENU
$ ❷!!
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
ECO. MODE
:OFF
IPC
:ON
❿
END:
MENU
$ ❷
37
Advertisement
Table of Contents
