Plug & Auto Set Up; Tuning Your Television For The Vcr - Samsung SV-G35K/AFR Instruction Manual

Video cassette recorder
Table of Contents

Advertisement

Plug & Auto Set Up
Your VCR will automatically set itself up when it is plugged into the
mains for the first time. TV stations will be stored in memory. The
process takes a few minutes. Your VCR will then be ready for use.
TV
1
Connect the coaxial cable as indicated on page 10.
(Connecting Your VCR to the TV Using the Coaxial Cable)
2
VIDEO
AUDIO
Plug the VCR into the mains.
LINE IN 1
TV
Result:
LINE OUT
3
Select the required language by pressing the
4
Press OK to store the language selected.
Result:
2
5
Press OK to start the auto scanning.
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6
On completion, press MENU twice to exit the menu.
AUTO SET UP
PLEASE WAIT
60%
I
-------I
END:MENU
CLOCK
12:00
1/JAN/2001
MON
➛❿!!!!!!!!!!!
# ❷
END:
MENU
12
The
LANGUAGE SET
menu is displayed.
or
buttons.
#
A message appears.

Tuning Your Television for the VCR

You must tune your television for the VCR only if you are not using
a RCA cable
To view pictures from your VCR when a RCA cable is
used, the television must be set to the audio/video mode
(AV).
1
Switch on the television.
2
Switch on the VCR by pressing STANDBY/ON on the front of the
VCR or VCR STANDBY/ON (STANDBY/ON) on the remote
control.
3
Select a programme position on the television to be reserved for
use with your VCR.
4
Insert the video cassette in the VCR. Check that the VCR starts
reading the cassette; if not, press
❿ II
button.
5
Start a scan on your television or set the television to UHF
channel 36.
6
Fine tune the television until the pictures and sound are obtained
clearly.
7
If you cannot find the pictures and sound, or there is interference
from nearby channels, it may be necessary to change the setting
of the VCR output channel (see Solving Problems section of this
manual).
8
When the picture and sound are perfectly clear, store this channel
at the desired programme position on the television.
Result:
That programme is now reserved for use with your VCR.
(SV-G85K)
(SV-G35K)
VCR STANDBY/ON
STANDBY/ON
2
2
S
S
GB
REC
MENU
4
OK
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sv-g85kSv-g35k

Table of Contents