Auto Power Off - Samsung SV-3000DS Instruction Manual

01823M SV-919_HACO-GB4 4/1/03 6:04 PM
Using the TV Buttons on the Remote Control
GB
Your VCR remote control will work with Samsung televisions and
compatible brands.
VCR STANDBY/ON TV STANDBY/ON
To determine whether your television is compatible, follow the instructions
below.
SLOW
1
SHUTTLE
1
V-LOCK
2
2
CLR/RST F.ADV INDEX
-/--
3
2 SELECT
TV VCR INPUT
REPEAT
CLR/RST F.ADV INDEX
-/--
SELECT
TV VCR INPUT
3
5
REPEAT
4
AUDIO DISP./
VOL PROG/TRK
5
TV VCR INPUT
REPEAT
6
AUDIO DISP./
VOL PROG/TRK
6
You can then control the television using the following buttons.
TV VCR INPUT
Button
REPEAT
TV STANDBY/ON
AUDIO DISP./
TV or VCR
VOL PROG/TRK
7
-/--
INPUT
VOL
PROG/TRK
(œ or ❷)
DISP./
40
Page 40
Switch your television on.
Point the remote control towards the television.
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01 to 06 PHILIPS 02, 20, 22
AKAI 09, 23 SABA 13, 14, 22 to 24
GRUNDIG 09, 17, 21 SONY 15, 16
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA 07, 16 to 19, 21
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogramme the code, following the same procedure.
Function
Used to switch the television on and off.
Used to switch between the TV and VCR modes.
+ –
Only the VOL ( or ) and TV STANDBY/ON
buttons are operational in VCR mode.
Used to enter a two-figure programme number.
Example: For programme 12, press -/-- followed
by numeric buttons 1 and 2.
Used to select an external source.
+ –
or Used to adjust the volume of the television.
Used to select the required programme.
Used to switch between an external source and
the television tuner.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.

Auto Power Off

The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2 Press the corresponding ,
œ ❷
EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding œ or ❷ buttons, until the
AUTO POWER OFF option is selected.
Press the ❿ button, until you select the time of Auto Power off
5
interval.
OFF 2HOUR 3HOUR
6
On completion, press MENU twice to exit the menu.
GB
PROG OPTIONS INSTALL
BONUS
CLOCK BONUS LANG
EASY OPERATION
➛❿¤¤
œ ❷¤¤ OK END: MENU
BONUS
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END: MENU
œ ❷
41