Presetting The Stations Manually; Clearing A Preset Station - Samsung SV-G35K/AFR Instruction Manual

Presetting the Stations Manually

You do not need to preset the stations manually if you
have already set them automatically.
To enable the VCR to decode a scrambled TV station, the
decoder must be switched on.
INSTALL
PROG OPTIONS INSTALL
1 Press the MENU button on the remote control.
CLOCK BONUS LANG
Result:
INSTALLATION
2 Press the corresponding
INSTALLATION
➛❿!!
OK END: MENU
" ❷!!
3
Press the OK button to select this option.
Result:
4
Press the corresponding
INSTALL
UP option is selected.
AUTO SET UP
MANUAL SET UP
5 Press the ❿ button to select
TV SYSTEM :K
Result:
VCR OUTPUT CH :CH36
6 Press the
required.
❿
END: MENU
" ❷
7 Press the ❿!button to preset the station.
Result:
8 Press the corresponding
** TV STATION TABLE ** selected. And then press ➛ or ❿ buttons to select the system if
PR CH SYSTEM
necessary.
1 002 K
2 ---
9 Press the corresponding
3 ---
Press the ➛ or ❿ buttons to start scanning.
4 ---
5 ---
Result:
❿ SWAPPING:OK
" ❷
If you know the number of the channel you want, press the
DELETE:CLR/RST MENU
numeric buttons on the remote control for example, for channel
E21, first press "0" and then press "2", "1" (see page 40).
10 If you...
** MANUAL TUNING **
SYSTEM : K
Wish to store the
PR : 1
station displayed
CH : ---
MFT : -
➛❿ MEMORY: OK
" ❷
END: MENU
Do not wish to
store the station
displayed
11 Repeat this procedure from Step
stations have been stored.
12 On completion, press the MENU button three times to exit the menu.
18
The programming menu is displayed.
, or ➛, ❿!buttons to select the
" ❷!
option.
The INSTALLATION menu is displayed.
or buttons, until the MANUAL SET
" ❷
MANUAL SET UP option.
The TV STATION TABLE menu is displayed.
or buttons to select a programme number as
" ❷
The MANUAL TUNING menu is displayed.
or buttons, until the SYSTEM is
" ❷
or buttons, until the CH is selected.
" ❷
The frequency band is scanned and the first station
found is displayed.
Then...
Press the corresponding or buttons,
" ❷!
until the MFT is selected.
Press the ➛ or ❿ buttons to adjust the
picture, if necessary.
Press OK to store the station .
Press the corresponding or buttons,
" ❷!
until the CH is selected.
Press the ➛ or ❿ buttons to go on
scanning the frequency band and display
the next station
Go back to the beginning of Step 10
6 onwards, until all the required

Clearing a Preset Station

If you have stored a TV station:
That you do not require
At the wrong programme position
you can cancel it.
1
Press the MENU button on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
" ❷!
INSTALLATION option.
3
Press the OK button to select this option.
Result: The menu is displayed.
INSTALLATION
4
Press the corresponding or buttons, until the MANUAL SET
" ❷
option is selected.
UP
5 Press the ❿ button to select this option.
Result: The TV STATION TABLE menu is displayed.
6
Press the corresponding or buttons, until the required preset
" ❷
TV station (PR) is selected.
7
Press the CLR/RST button.
8 Repeat the same procedure from Step 6 onwards until all the
required stations have been cleared.
9 On completion, press the MENU button three times to exit the
menu.
INSTALL
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALLATION
➛❿!!
OK END: MENU
" ❷!!
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM :K
VCR OUTPUT CH :CH36
GB
❿ END: MENU
" ❷
** TV STATION TABLE **
PR CH SYSTEM
1 002 K
2 ---
3 ---
4 ---
5 ---
❿ SWAPPING:OK
" ❷
DELETE:CLR/RST MENU
19