Table of Contents
Advertisement
Auto Power Off
GB
The Auto Power Off feature automatically turns off your VCR if no
signal is received and you do not press any button for the selected
time.
1
PROG
OPTIONS
INSTALL
CLOCK
BONUS
BONUS
LANG
2
EASY OPERATION
➛❿!!
OK
END:
MENU
" ❷!!
3
4
BONUS
AUTO POWER OFF
:OFF
REPEAT PLAY
:OFF
5
NO. OF
INTERVAL REPEAT : 5
❿
" ❷
END:
MENU
6
ECO Mode-Reducing Standby power consumption
Low Power Mode reduces the Standby power consumption of the
VCR when in Standby mode.
Useful, for example, when you are away from the house on holiday.
It saves actually turning the VCR off.
1
PROG
OPTIONS
OPTIONS
INSTALL
2
CLOCK
BONUS
LANG
USER SET
3
➛❿!!
OK
END:
MENU
" ❷!!
4
5
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
NICAM
:ON
ECO. MODE
:OFF
IPC
:ON
6
❿
END:
MENU
" ❷
36
Press MENU on the remote control.
Result:
The programming menu is displayed.
Press the corresponding
,
or ➛, ❿ buttons to select the
"
❷
EASY OPERATION
option.
Press the OK button to select this option.
Result:
The
EASY OPERATION
menu is displayed.
Press the corresponding
or
buttons, until the
"
❷
AUTO POWER OFF
option is selected.
Press the ❿ button, until you select the time of Auto Power off
interval.
OFF
2HOUR
3HOUR
On completion, press MENU twice to exit the menu.
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
Press the corresponding
,
"
❷
USER SET
option.
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
Press the corresponding
or
buttons, until the
ECO. MODE
"
❷
is selected.
Press the ❿!button to turn LOW(3Watts) mode on. Now, when the
VCR is standby mode the front display panel will shut off.
Even the clock disappears. By pressing the VCR STANDBY/ON
button again the display panel will reappear.
On completion, press MENU twice to exit the menu.
Technical Specifications
Design and specifications are subject to change without notice.
Format
VHS PAL/NTSC standard
Heads
Video: 4 rotary heads
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head
Erase: 1 full track erase head
Receiving channel
VHF-I, VHF-III, UHF, Interband/Hyperband
Television system
STANDARD B/G-D/K A2/NICAM STEREO
Luminance
FM azimuth recording
Colour system
PAL/MESECAM/NTSC: Down converted subcarrier phase shifted
NTSC PB on PAL TV
<PAL/MESECAM>
Tape speed
SP
23.39 mm/sec
LP
11.69 mm/sec
<PAL/MESECAM>
Recording/playback time
SP
3 hours (E-180 Tape)
LP
6 hours (E-180 Tape)
REW time
About 60 sec in REW with E-180
VIDEO
Input
0.5 to 2.0 Vp-p; 75 ohm unbalanced
Output
1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Signal-to-noise ratio
Better than 43 dB (SP)
Horizontal resolution
More than 240 lines (SP)
AUDIO
Input
-8 dBm, 47 Kohm unbalanced
Output
-8 ± 3 dBm, 1 Kohm unbalanced
Wow and flutter (WTD)
0.4% max (SP)
Signal-to-noise ratio
68 dB min (IHF A filter)
Frequency response
20Hz - 20kHz
Power requirement
AC 100-240V 50/60 Hz
Power consumption
Approx. 17 watts
Operation temperature
41°F-104°F (5°C-40°C)
Operation humidity
10%-75%
Weight
3.3 Kg (net)
Dimensions (WxHxD)
360 x 94 x 287 mm
GB
direct recording
<NTSC>
SP
33.35 mm/sec
SLP
11.12 mm/sec
<NTSC>
SP
2 hours (T-120 Tape)
SLP
6 hours (T-180 Tape)
37
Advertisement
Table of Contents
