Table of Contents
Advertisement
Recording a Programme with Automatic Stop
This function enables you to record up to nine hours of
programmes. (LP)
Your VCR stops automatically after the requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select the television
channel reserved for use with your VCR (or the AV input if used)
3
Insert the cassette on which the programme is to be recorded,
with the window visible and the safety tab intact or the opening
covered with adhesive tape.
Result:
The VCR is switched on automatically.
4
Select:
The station to be recorded using the PROG/TRK (œ or ❷) /
PROG (œ or ❷) buttons
or
The LINE IN 1 or LINE IN 2 source using the INPUT button
for a satellite tuner or external video source
Result:
The channel number is displayed and the programme
can be seen on the television.
5
Select the recording speed (SP/LP) by pressing the SPEED button
as many times as required (see page 22).
6
Hold the REC button down for a while to start recording.
Result:
The record indicator appears on the television screen
and VCR display. An index is recorded on the tape
(see page 33).
7
Press the REC button several times to increase the recording time
in:
30-minute intervals up to four hours
1-hour intervals up to nine hours (LP)
Result:
The length is displayed on the television displays. The
selected programme is recorded for the length of time
requested. At the end of that time, the VCR stops
recording automatically.
8
If you wish to cancel the recording before the end, press
VCR STANDBY/ON (STANDBY/ON).
If the end of the tape is reached while recording:
The recording stops
The VCR automatically turns off
3
(SV-264GS)
(SV-660GS/SV-465GS)
CT
VCR
INPUT
4
REPEAT
DISP./
RK
OL
PROG/TRK
4
REC
6
OK
5
SPEED
DUB
TV/VCR
LENGTH 2:30
SET LENGTH :
PRESS
REC
25
GB
IPC
INPUT
4
REPEAT
DISPLA
PROG
4
MENU
TIMER
Advertisement
Table of Contents
