Table of Contents
Advertisement
Displaying/Hiding On-Screen Information
GB
PROG
OPTIONS
OPTIONS
INSTALL
CLOCK
BONUS
LANG
USER SET
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
OPTIONS
OSD
:ON
TAPE SELECT
:E180
COLOUR SYSTEM
:AUTO
NICAM
:ON
IPC
:ON
❿
END:
MENU
œ ❷
Choosing Your Language
REC
MENU
2
2
2
OK
3
SPEED
DUB
TV/VCR
TIMER
16
Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU which cannot be
hidden).
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
,
œ
❷
USER SET
option.
3
Press the OK button to select this option.
Result:
The
USER SET
menu is displayed.
4
Press the corresponding
œ
or
❷
buttons, until the
selected.
Press ➛ or ❿, until...
5
To...
Display on-screen information
ON
is displayed.
Hide on-screen information
OFF
is displayed.
6
On completion, press MENU twice to exit the menu.
You can change the language in which information is displayed on
the screen.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding
œ
,
❷
LANGUAGE SET
option.
3
Press the OK button to select this option.
Result:
The
LANGUAGE SET
menu is displayed.
4
Select the required language by pressing the
œ
5
Press OK to store the language selected.
6
Press MENU to exit the menu.
Result:
From now on, all the on-screen information will be
displayed in the language selected.
Setting the VCR Output Channel
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
INSTALLATION
3
Press the OK button to select this option.
Result:
The
4
Press the corresponding
CH
option is selected.
OSD
option is
Select the required output channel by pressing the ➛ or ❿ buttons.
5
6
On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
Selecting the RF OUT Sound Mode
You must choose the sound mode (G or K) according to the TV set
connected to your VCR.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
INSTALLATION
3
Press the OK button to select this option.
Result:
The
4
Press the corresponding
option is selected.
or
buttons.
❷
Press the ❿ button to select G or K.
5
6
On completion, press MENU twice to exit the menu.
or ➛, ❿ buttons to select the
,
œ
❷
option.
INSTALLATION
menu is displayed.
œ
or
❷
buttons, until the
VCR OUTPUT
or ➛, ❿ buttons to select the
,
œ
❷
option.
INSTALLATION
menu is displayed.
œ
or
❷
buttons, until the
TV SYSTEM
GB
INSTALL
PROG
OPTIONS
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
VCR OUTPUT CH :CH36
❿
œ ❷
END:
MENU
PROG
OPTIONS
INSTALL
INSTALL
CLOCK
BONUS
LANG
INSTALLATION
➛❿¤¤
œ ❷¤¤
OK
END:
MENU
INSTALL
AUTO SET UP
MANUAL SET UP
TV SYSTEM
:G
VCR OUTPUT CH :CH36
❿
END:
MENU
œ ❷
17
Advertisement
Table of Contents
