Using The Tape Counter - Samsung SV-641B Instruction Manual

01327A SV-641B/XSA-GB4 7/5/02 11:54 AM
G-CODE EXTEND (SV-640B/SV-245B Only)
GB
To prevent delays or over-runs the VCR has a function called
G-CODE EXTEND allowing you to extend the recording time by up
to 60 minutes.
PROG OPTIONS INSTALL
BONUS
CLOCK BONUS LANG
EASY OPERATION
➛❿!!
OK END: MENU
" ❷!!
BONUS
G-CODE EXTEND :OFF
AUTO POWER OFF :OFF
REPEAT PLAY :OFF
NO. OF
INTERVAL REPEAT : 5
❿
END: MENU
" ❷

Using the Tape Counter

The tape counter:
0:00:00
(SV-641B/SV-640B/
(SV-240B)
SV-445B/SV-245B)
CLR/RST F.ADV INDEX CLR/RST F.ADV INDEX
-/--
SELECT
A.TRK IPC INPUT
TV VCR INPUT
2
2
REPEAT
REPEAT
AUDIO DISP./ UDIO DISPLAY
TRK PROG
VOL PROG/TRK
2
2
REC MENU REC MENU
36
Page 36
1
Press the MENU button on the remote control.
2 Press the corresponding , or ➛, ❿ buttons to select the
" ❷
EASY OPERATION option.
3
Press the OK button to select this option.
Result: The EASY OPERATION menu is displayed.
4
Press the corresponding or buttons, until the
" ❷
G-CODE EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the G-CODE EXTEND time by
increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until OFF
Indicates the elapsed time in the play and record modes
(hours, minutes and seconds)
Is reset when a cassette is inserted in the VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press DISP./ or DISPLAY twice to display the counter
Press CLR/RST when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
➛ ➛ ❿ ❿
counter was set to zero, press or .
Some VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
Once to display the current function, programme
number, recording speed (SV-641B/SV-640B/
SV-445B only), date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
Connecting an RCA Audio/Video Input Cable
(SV-640B/SV-245B Only)
You can connect other audio/video equipment to your VCR using
audio/video cables if the appropriate outputs are available on the
equipment chosen.
You wish to copy a video cassette with the help of a
Examples:
second VCR (see page 38).
You wish to play back and/or copy pictures taken
with a camcorder (see page 38).
You wish to dub a prerecorded video cassette with
sound from a stereo system (see page 39).
Regardless of the type of connection chosen, you
must always connect the coaxial cable supplied.
Otherwise, no picture will be visible on the screen
when the VCR is switched off.
shows. Make sure that both the television and the VCR are
switched off before connecting the cables.
1
Connect one end of the RCA audio/video cable into the VIDEO
INPUT socket on the front of the VCR.
2 Plug the other end of the audio/video cable into the appropriate
output connector on the other system (VCR or camcorder).
3 Connect one end of the RCA audio cable supplied into the AUDIO
INPUT sockets on the front of the VCR.
Take care to respect the colour coding of the left and right
channels.
4
Plug the other end of the audio cable into the appropriate output
connectors on the other system (VCR, camcorder or Hi-Fi sound
system).
GB
(SV-640B)
STANDBY/ON
EJECT
LINE IN 2
VIDEO L AUDIO R PROG
1
STANDBY/ON
EJECT
LINE IN 2
VIDEO L AUDIO R
PROG
3
3
(SV-245B)
STANDBY/ON
EJECT
LINE IN 2
VIDEO AUDIO PROG
3
1
37