Intelligent Picture Control; Selecting The Colour Mode - Samsung SV-641B Instruction Manual

01327A SV-641B/XSA-GB3 7/5/02 11:53 AM

Intelligent Picture Control

GB
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
preferences.
PROG OPTIONS OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿!! OK END: MENU
# ❷!!
PTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
ECO. MODE :OFF
IPC :ON
❿ END: MENU
# ❷
Intelligent Picture Control
The Intelligent Picture Control Feature allows you to adjust the
sharpness of the image automatically, according to your own
CLR/RST F.ADV INDEX
preferences.
A.TRK IPC INPUT
REPEAT
1
AUDIO DISPLAY
TRK PROG
** PICTURE **
IPC : OFF
SOFTEN SHARPEN
*
-------- -----
➛❿
ON/OFF: ❷
30
Page 30
1
During playback, press the MENU button on the remote control.
Result: The programming menu is displayed.
2 or ➛, ❿ buttons to select the
Press the corresponding ,
# ❷
USER SET option.
3 Press the OK button to select this option.
Result: The USER SET menu is displayed.
4 Press the corresponding or buttons, until the IPC
# ❷
selected.
5 Press the ❿!button to select the IPC (intelligent picture control)
option.
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
6
To adjust the sharpness manually, press the button to turn the
❷
IPC mode OFF .
7 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
PICTURE menu disappears automatically.
8
On completion, press the MENU button again.
(SV-240B Only)
1 During playback, press the IPC button on the remote control.
2 Press the button to turn the IPC (intelligent picture control)
❷
option ON and OFF .
When intelligent picture control mode is ON , the sharpness
of the image is adjusted automatically.
3
To adjust the sharpness manually, select intelligent picture control
mode OFF .
The horizontal picture adjusting appears.
4 Press the ➛ or ❿ buttons until the picture is displayed according to
your preferences.
If you do not press a button within ten seconds, the
menu disappears automatically.
PICTURE
5
On completion, press the IPC button again.

Selecting the Colour Mode

Before recording or playing back a cassette, you can select the
required system standard.
When you playback an NTSC-recorded tape on this VCR
make a setting on the colour system according to your TV.
If your TV is a PAL system only TV, set NTPB.
If your TV is Multi System TV (NTSC 4.43 compatible), set
NT4.43 and you can record NT4.43.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
option is
2 Press the corresponding
#
USER SET option.
3 Press the OK button to select this option.
Result: The USER SET
4
Press the corresponding
#
COLOUR SYSTEM option is selected.
5 Press the ❿ button to select
AUTO When playing back a cassette, the PAL/NTSC system
standard is automatically selected by the VCR.
B/W Black and White
6 On completion, press MENU twice to exit the menu.
PROG
CLOCK
USER SET
➛❿!!
OK
# ❷!!
or ➛, ❿ buttons to select the
,
❷
PTIONS
OSD
menu is displayed.
TAPE SELECT
COLOUR SYSTEM
or buttons, until the
❷ ECO. MODE
IPC
AUTO PAL MESECAM B/W .
❿
# ❷
GB
OPTIONS OPTIONS INSTALL
BONUS LANG
END: MENU
:ON
:E180
:AUTO
:OFF
:ON
END: MENU
31