Table of Contents
Advertisement
01327A SV-641B/XSA-GB4
7/5/02 11:54 AM
Picture Search, Fast Forward/Rewind
Picture Search enables you to Fast Forward or Rewind and look for
GB
a particular part of a tape.
Searching for a Specific Sequence
Each time you record a cassette on this VCR, an "index" is
automatically marked on the tape when recording starts.
The Search function allows you to fast-forward or rewind to a
specific index and start playback from that point. Depending on the
SHUTTLE
direction selected, the indexes are numbered as follows:
V-LOCK
ST
F.ADV
INDEX
1
IPC
INPUT
INTRO SCAN
INDEX:
➛ ➛!!!!!❿ ❿
Index Skip Search:
This feature will enable you to fast forward/rewind to a specific
point on a tape: E.g. if you have recorded 3 different programmes
on a tape and you have rewound the tape to the beginning, by
INDEX SEARCH:
❿ ❿!!!!
+01
using this feature you can go directly to the start of programme 2
simply by pressing the INDEX button.
34
Page 34
1
Press PLAY, the VCR will enter normal play mode. While in play,
press and release the
❿ ❿
(or
➛ ➛
) button. The VCR will search at 5
times the normal playback speed.
2
❿ II
To return to normal playback mode, press the
button.
3
If you press and HOLD down the
❿ ❿
(or
➛ ➛
) button the VCR will
search at 9 times the normal speed. Releasing the
return the VCR to search at 5 times the normal speed. To return to
❿ II
normal playback mode, press the
button.
4
❿ ❿
Whilst in Picture Search mode, if you press the
the VCR will enter normal Fast Forward mode.
5
Likewise, whilst in Picture Search
➛ ➛
mode, if you press the
button again, the VCR will enter normal Rewind mode.
6
➛ ➛
❿ ❿
If, when Redwing (
) or Fast Forwarding (
), you press the
(or
❿ ❿
) button, the VCR will enter the Picture Search mode.
Prev
Seq. being
Next
etc.
etc.
Seq.
played
Seq.
2
1
1
2
This VCR uses a standard indexing system (VISS). As a
result, it will recognize any indexes marked by other
VCRs using the same system and vice versa.
1
To search for a specific index, press INDEX.
2
Press the
➛ ➛
or
❿ ❿
buttons depending on the direction
where your desired programme is located.
3
When an Index mark is found the VCR will playback the tape for 5
seconds, after which it will continue searching for the next Index mark.
4
If you want to watch the tape from a particular Index, simply press
1
Press the INDEX to start the Index search.
2
➛ ➛
❿ ❿
Press the
or
buttons twice more. This will take
you directly to the start of the desired programme is located.
3
These Index searches can be made forwards: (press
backwards: (press
➛ ➛
).
4
❿ II
To cancel an Index search simply press the
or
button.
Auto Repeat Play
You can set repeat play to repeat the tape continuously from
beginning to end.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
❿ ❿
button will
2
Press the corresponding
EASY OPERATION
3
Press the OK button to select this option.
button again,
Result:
The
EASY OPERATION
4
Press the corresponding
➛ ➛
REPEAT PLAY
option is selected.
5
To...
➛ ➛
Repeat play
Do not wish to repeat play
6
On completion, press MENU twice to exit the menu.
Interval Repeat Play
You can set interval repeat play to repeat the cassette several times
for special interval.
1
Press MENU on the remote control.
Result:
The programming menu is displayed.
2
Press the corresponding
EASY OPERATION
3
Press the OK button to select this option.
Result:
The
EASY OPERATION
4
Press the corresponding
NO. OF INTERVAL REPEAT
5
To...
Interval repeat play
❿ II
.
Cancel interval repeat play
6
On completion, press MENU twice to exit the menu.
7
To select interval during playback, press the INPUT/REPEAT
button at the desired start point.
Result:
"
INTERVAL REPEAT SETTING
Press the INPUT/REPEAT button one more time at the desired
end point.
❿ ❿
) or
Result:
The tape is automatically rewound to the start point.
"
INTERVAL REPEAT
(SV-640B/SV-245B)
BONUS
G-CODE EXTEND
AUTO POWER OFF
REPEAT PLAY
or ➛, ❿ buttons to select the
,
"
❷
NO. OF
option.
" ❷
menu is displayed.
or
buttons, until the
"
❷
(SV-641B/SV-445B/SV-240B)
Press ➛ or ❿, until...
BONUS
AUTO POWER OFF
ON
is displayed.
REPEAT PLAY
NO. OF
is displayed.
OFF
" ❷
(SV-640B/SV-245B)
or ➛, ❿ buttons to select the
,
"
❷
option.
BONUS
G-CODE EXTEND
AUTO POWER OFF
REPEAT PLAY
menu is displayed.
NO. OF
or
buttons, until the
"
❷
option is selected.
" ❷
Press ❿, until...
5, 10, 15 is displayed.
(SV-641B/SV-445B/SV-240B)
(choose repeat time 5 times,
10 times, 15 times)
BONUS
OFF
is displayed.
AUTO POWER OFF
REPEAT PLAY
NO. OF
" is displayed.
" ❷
" is displayed.
GB
:OFF
:OFF
:OFF
INTERVAL REPEAT : 5
❿
END:
MENU
:OFF
:OFF
INTERVAL REPEAT : 5
❿
END:
MENU
:OFF
:OFF
:OFF
INTERVAL REPEAT : 5
❿
END:
MENU
:OFF
:OFF
INTERVAL REPEAT : 5
❿
END:
MENU
35
Hide quick links:
Advertisement
Table of Contents
