Connecting To A Cable Box That Descrambles All Channels; Connecting To A Cable Box That Descrambles Some Channels - Samsung LN-R377D Owner's Instructions Manual

C
O N N E C T I O N S

Connecting to a Cable Box that Descrambles All Channels

1
Find the cable that is
connected to the
ANT OUT terminal
on your cable box.
2
Connect the other end
of this cable to the
ANT 1 IN(CABLE)
terminal on the back
of the TV.

Connecting to a Cable Box that Descrambles Some Channels

If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of RF cable. (These items are available at most electronics stores.)
1
Find and disconnect
the cable that is
connected to the
ANT IN terminal
on your cable box.
2
Connect this cable
to a two-way splitter.
3
Connect an RF
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
ANT IN ANT OUT
ANT 1 IN
(CABLE)
ANT IN
Incoming
cable
Splitter
Incoming
cable
Splitter
English-
This terminal might be labeled
"ANT OUT", "VHF OUT" or
simply, "OUT".
This terminal might be labeled
"ANT IN", "VHF IN" or simply, "IN".
9
Cable Box