Using The Tv Buttons On The Remote Control - Samsung SV-DVD540A Instruction Manual

VCR
STANDBY/ON
1
GB
2
4
4
5
5
6
44

Using the TV Buttons on the Remote Control

OPEN/CLOSE
2
3
Your DVD-VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible, follow the
instructions below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes
SAMSUNG 01 to 06
AKAI 09, 23
GRUNDIG 09, 17, 21
LOEWE 02
PANASONIC 08, 23 to 27
Result: If your television is compatible with the remote control,
it will switch off. It is now programmed to operate with
the remote control.
If several codes are indicated for your television brand,
try each one in turn until you find one that works.
When you change the batteries in the remote control,
you must reprogramme the code, following the same
procedure.
You can then control the television using the following buttons.
Button Function
STANDBY/ON Used to switch the television and DVD-VCR on and off.
TV or VCR Used to switch between the TV and VCR modes.
INPUT SEL. Used to select an external source.
+ –
VOL or Used to adjust the volume of the television.
PROG/TRK Used to select the required programme.
( or )
TV MUTE Used to mute the volume of the television.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Brand Codes
PHILIPS 02, 20, 22
SABA 13, 14, 22 to 24
SONY 15, 16
THOMSON 13, 14, 24
TOSHIBA 07, 16 to 19, 21