Remote Control Overview; Insert Remote Control Batteries; Using The Tv Buttons On The Remote Control - Samsung DVD-V2000 Instruction Manual

00005A DVD-V2000/XAC-Eng1 11/12/02 7:06 PM

Remote Control Overview

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17

Insert Remote Control Batteries

10
Page 10
1 POWER (p.13)
2 SCREEN FIT (p. 33)
3 SHUTTLE <</>> (p.43)
4 MODE (p.40, 41)
REPEAT (p.37, 38, 43)
5 ZOOM (p.35), TV MUTE (p.11)
18
6 3D SOUND (p.42), 100+ (p.15)
7 DVD (p.13)
8 DIGEST (p.36)
19
F.ADV/SKIP (p.32, 43)
20
9 VOLUME +/– (p.11)
21 10 REWIND (p.32, 43)
SKIP BACK (p.32, 43)
22 11 STOP (p.32)
23 12 RECORD (p.46)
13 UP (p.15)
14 LEFT (p.15)
24
15 SETUP (p.15)
ENTER (p.15)
25
16 RETURN (p.15)
17 TITLE (p.33)
26
SP/SLP (p.48)
27
18 OPEN/CLOSE (p.13, 14)
19 TV/VCR (p.15)
28
20 0-9 (p.15)
21 AUDIO (p.38)
29
22 ANGLE (p.35)
30
INPUT SEL. (p.46)
23 CLEAR (p.39, 40, 41)
31
24 VCR, TV SELECT (p.13)
25 DISPLAY (p.15, 34)
32 26 CHANNEL /
TRACKING /
27 FAST-FORWARD (p.32, 43)
33
SKIP NEXT (p.32, 43)
28 DISC MENU (p.33)
29 PLAY/PAUSE (p.13, 14)
30 RIGHT (p.15)
31 DOWN (p.15)
32 MARK (p.39)
SEARCH (p.45)
33 SUBTITLE (p.36)
TIMER (p.49)
• Remove the battery cover by pushing down on the thumb tab and
sliding the cover.
• Insert two 1.5V "AA" batteries as shown, paying attention to the correct
polarities (+/–).
• When finished, slide the cover until it clicks back into place.

Using the TV Buttons on the Remote Control

Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1
Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand
SAMSUNG
SHARP
SONY
RCA
TOSHIBA
PANASONIC
JVC
HITACHI
MITSUBISHI
NEWSAN
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
(p.11, 15) If several codes are indicated for your television brand, try
(p.43) each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogram the code, following the same procedure.
You can then control the television using the following buttons.
Button Function
POWER Used to switch the television on and off.
INPUT Used to select an external source.
+ –
VOL or Used to adjust the volume of the television.
CH ( or ) Used to select the required channel.
MUTE Used to toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Codes Brand Codes
01, 14, 15, 23 LOEWE 28
02, 16, 22 ZENITH 17
03 LG 06, 08, 18
07, 29 MAGNAVOX 04
09 EMERSON 21
12, 24 SANYO 05, 20
11 DAEWOO 19
10 NOBLEX 25
13 TELEFUNKEN 26
27
1
2
3
3
4
4
5
11