Table of Contents
Advertisement
Setting Up the Display Options
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Display Setup using
❿ button.
4
Use the
,
buttons to select the desired item. Then press the
❷
OK or ❿ button.
• TV Aspect
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 L-Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and right side of movie
picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
• Black Level
Adjusts the brightness of the screen.(On/Off)
• NTSC Disc Output
"NTSC" if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave " PAL 60Hz" as is.
• DVD Out
1. RGB: Sends RGB signal from the AV JACK(SCART terminal).
2. S-Video: Sends S-VIDEO signal from the AV JACK(SCART terminal).
3. Video: Sends COMPOSITE VIDEO signal from the AV
JACK(SCART terminal).
buttons, then OK or ❿ button.
,
❷
,
buttons, then press the OK or
❷
DVD
Setup
Setup
Display Setup
Setup
:
Display Setup
: 4:3 L-Box
TV Aspect
Black Level
NTSC Disc Output
: PAL 60
DVD Out
: RGB
GB
49
Advertisement
Table of Contents
