Using The Tape Counter - Samsung DVD-CM250 Instruction Manual

VCR
GB
40

Using the Tape Counter

0:00:00
2
2
The tape counter:
Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
Is reset when a cassette is inserted in the DVD-VCR
Allows you to find the beginning of a sequence easily
If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
2
To set the tape counter to zero at the beginning of a sequence:
Press INFO. twice to display the counter
Press CLEAR when you want to set the tape counter to
zero
3
When you are ready,
Start playback or Recording.
Press the button.
To fast-froward or rewind to the sequence at which the
counter was set to zero, press
Some DVD-VCR information, such as the counter, can be
displayed on the television screen (unless you have
deactivated the Screen messages mode; refer to page 30).
Press INFO.:
Once to display the current function, programme
number, recording speed, date, time and counter
Twice to display the counter only
Three times to display the time remaining on the
cassette
Four times to clear the display
➛ ➛ ❿ ❿
or .