Setting Up The Display Options; S-Video Connections (For Dvd) - Samsung DVD-CM250 Instruction Manual

DVD
Setup
Display Setup
GB
TV Aspect
Black Level
NTSC Disc Output
DVD Out
DVD
DVD Only
COMPONENT VIDEO OUT
S-VIDEO OUT
To S-Video Input on Your TV
50

Setting Up the Display Options

Setup
Setup :
Display Setup
: 4:3 L-Box
: PAL 60Hz
: Component

S-Video Connections (for DVD)

SPEAKERS
FRONT R FRONT L WOOFER
1
SURROUND R SURROUND L CENTER
1
With the unit in Stop mode, press the MENU button.
2
Select DVD using
3
Select Display Setup using
or ❿ button.
4
Use the , buttons to select the desired item. Then press the
❷
OK or ❿ button.
TV Aspect
•
Depending on the type of television you have, you may want to adjust
the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD supplies,
even though you have a TV with a 4:3 ratio screen. Black
bars will appear at the top and bottom of the screen.
2. 4:3 Pan Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Black Level
•
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
•
"NTSC" if the screen only has one NTSC-video entrance. If this is not
the case, you can choose to leave " PAL 60Hz" as is.
DVD Output
•
Component : Sends COMPONENT signal (Y, Pb, Pr) to
the component video out JACK.
S-Video : Sends S-VIDEO signal to the S-VIDEO OUT JACK.
Video : - Sends COMPOSITE VIDEO signal to Line out JACK.
- Sends COMPONENT INTERLACE signal from
COMPONENT JACK.
The S-Video is only for the DVD player. The tuner and VCR
will still be viewed through the RF or line inputs.
You must follow the "DVD Out" instructions above to activate
your alternative (S-Video) video selection. If your television is
equipped with S-Video input, you can enjoy superior video
quality when watching DVDs with your DVD-VCR.
1 Connect S-Video Out to TV
Connect an S-Video cable from the S-Video Out on the back
panel of the DVD-VCR to the S-Video Input on your television.
buttons, then OK or ❿ button.
,
❷
, buttons, then press the OK
❷