Changing The Preset Station Table - Samsung DVD-CM250 Instruction Manual

VCR
Language
Install
User Set
GB
Auto Power Off
Screen Messages
Australia Model
Auto Setup
Manual Setup
VCR Output CH
Newzealand Model
Auto Setup
Manual Setup
TV System
VCR Output CH
TV STATION TABLE
PR
1
2
3
4
5
DELETE : CLEAR
TV STATION TABLE
PR
1
2
3
4
5
DELETE : CLEAR
22

Changing the Preset Station Table

: English
: Off
: On
Install
: CH 38
Install
: G
: CH 36
CH NAME
021 - - - -
SWAPPING : OK
RETURN
CH NAME
021 – – – –
SWAPPING : OK
RETURN
You can rearrange the Station Table and give different
programme numbers to the stations listed according to your own
preferences.
1 After pressing the MENU, press the OK or ❿ .
Result: The Setup menu is displayed.
2
Press the corresponding
option.
3 Press the OK or ❿ buttons to select this option.
Result: The Install
4
Press the corresponding
Setup option is selected.
5 Press the OK or ❿ button to select this option.
Result: The
TV STATION TABLE
6
Press the corresponding
preset TV programme is selected.
Result: The selected station is displayed at the same time on
the television screen.
7
To change the programme number assigned to a station press
the OK button on the remote control. (For example, To move a
TV station in programme 1 to programme 3)
8
Press the or buttons to select required position.
❷
And then press OK again to swap the position.
9
On completion, press the RETURN button four times to exit the
menu.
, buttons to select the
❷
menu is displayed.
or buttons, until the
❷
menu is displayed.
or buttons, until the required
❷
Install
Manual