Table of Contents
Advertisement
Audio Dubbing a Pre-recorded Cassette
With the Audio Dubbing function, you erase the previously
recorded sound and replace it with a new soundtrack from:
A CD, DVD
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal audio track
(normal audio).
1
Connect an RCA audio cable to the appropriate output on your
sound system (cassette player for example).
2
Connect the other end of the RCA audio cable to the audio input
connectors (L, R) on the rear of your DVD-VCR.
3
Insert the pre-recorded cassette on which the audio track is to
be replaced, and press the
4
Search for the Audio Dubbing (ending) point using the
set the counter to 0:00:00 by pressing INFO. and CLEAR.
5
Search back slightly beyond the Audio Dubbing start point using
➛ ➛
the
button.
❿
6
Press the
ll button.
❿
Press the
ll button one more time to make Still mode.
7
Press A.DUB.
Result:
Your DVD-VCR is now in the Audio dubbing Still mode.
8
On the sound system, locate the point on the cassette at which
you wish to start playback.
Example: The track that you wish to record on the cassette.
9
When you are ready:
Start playback on the sound system
Press the REC (
Result:
The soundtrack is replaced on the pre-recorded
cassette.
10
The audio dubbing will finish when the counter reaches 0:00:00.
The new sound will be recorded on the normal sound
track of the tape, and the original sound will remain on
the Hi-Fi sound track.
To hear the new sound and original sound mixed
together, press the Audio button on the remote control
until the MIX option is displayed (see page 36).
❿
ll to start playback.
) on the remote control.
IN
(FROM ANT.)
RF
OUT
(TO TV)
❿ ❿
, and
VCR
DVD & VCR
LINE
LINE
IN
OUT
R
RADIO ANT.
AUDIO
FM
75
L
COAXIAL
AM
VIDEO
7
A.DUB
-0:05:23
43
GB
Hide quick links:
Advertisement
Table of Contents
