Recording With A Dv Connection Cable (Vp-D93I/D97I/D99I Only) - Samsung VP-D97I Owner's Instruction Book

IEEE 1394 Data Transfer

Recording with a DV connection cable (VP-D93i/D97i/D99i only)

1. Set the mode switch to TAPE.
2. Set the power switch to PLAYER mode.
3. Connect the DV cable (not supplied) from the DV IN/OUT port of the camcorder to the
DV IN/OUT port of the other DV device.
Make sure that DV appears on the screen.
4. Press the START/STOP button to begin REC PAUSE mode.
PAUSE is displayed on the OSD.
5. Start playback on the other DV device while you monitor the picture.
6. Press the START/STOP button to start recording.
If you want to pause recording momentarily, press the
START/STOP button again.
7. To stop recording, press the
Notes
When using this camcorder as a recorder, the pictures that appear
on a monitor may seem uneven, however recorded pictures will not
be affected.
Operation is not guaranteed for all the recommended computer environments mentioned above.
(STOP) button.
ENGLISH
77 77