Adjusting The Lcd During Play; Controlling Sound From The Speaker; Lcd-Monitor Während Der Wiedergabe Einstellen; Tonwiedergabe Über Den Lautsprecher - Samsung VP-D190MSI Owner's Instruction Book

Digital video camcorder, auto focus, charge coupled device, liquid crystal display
Hide thumbs Also See for VP-D190MSI:
Table of Contents

Advertisement

ENGLISH
Basic Recording

Adjusting the LCD during PLAY

You can adjust the LCD during playback.
The adjustment method is the same procedure as used in
CAM mode. (see page 29)
Notes regarding the rotation of the LCD screen

Controlling Sound from the Speaker

The Speaker works in VCR mode only.
When you use the LCD screen for playback, you
can hear the recorded sound from
the built-in Speaker.
-
Follow the instructions below to decrease
or mute speaker volume in the VCR mode.
-
Take the following steps to lower the volume
or mute the sound while playing a tape
on the VCR.
1. Set the power switch to VCR mode.
2. Press
(PLAY/STILL) to play the tape.
3. When you hear sounds once the tape is in play,
use the MENU DIAL to adjust the volume.
A volume level display will appear on the LCD.
Levels may be adjusted from anywhere between
00 to 19 and you will not hear any sound when
the volume is set on 00.
If you close the LCD while playing, you will not
hear sound from the speaker.
32
Einfache Aufnahmen erstellen
LCD-Monitor während der Wiedergabe einstellen
Sie können den LCD-Monitor während der Wiedergabe
einstellen.
Gehen Sie dabei genauso vor wie unter "LCD-Monitor
einstellen" auf Seite 29 beschrieben.
Tonwiedergabe über den Lautsprecher
Der Lautsprecher funktioniert nur im VCR-Modus.
REV
2
Wenn Sie Aufnahmen auf dem LCD-Monitor
S.SHOW
wiedergeben, kommt der Ton aus dem
Lautsprecher.
FWD
-
Führen Sie die unten beschriebenen Schritte
DELETE
aus, um die Lautstärke zu verringern oder den
Lautsprecher auszuschalten.
3-1
1. Stellen Sie den Betriebsmodus-Schalter auf VCR.
2. Drücken Sie die Taste
die Wiedergabe der Kassette zu starten.
3. Wenn der Ton wiedergegeben wird, können Sie
die Lautstärke mit dem Menü-Einstellrad
einstellen.
<3-2>
Auf dem LCD-Monitor erscheint ein
Lautstärke-Einstellbalken. Einstellbereich:
0 : 2 3 : 4 7
00 bis 19 (00 - keine Tonwiedergabe).
5 5 min
Wenn Sie den LCD-Monitor schließen, ist kein
Ton mehr zu hören.
VOL.
[ 1 1 ]
12:00
1. JUN. 2002
DEUTSCH
(PLAY/STILL), um

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vp-d190ms

Table of Contents