ENGLISH
Troubleshooting Check
Troubleshooting Check
Before contacting a service centre, perform the following simple checks.
They might save you the time and the expense of an unnecessary call.
Self Diagnosis Display
Display
Blinking
slow
TAPE END
slow
TAPE END
TAPE
TAPE
D.EMG
C.EMG
R.EMG
L.EMG
DEW
56
Inform that...
the battery pack is almost
discharged.
fast
the battery pack is fully
discharged.
the tape has almost reached
its end.
no
the tape reached its end.
slow
there is no tape in the camcorder.
slow
the tape is protected
from recording.
slow
the camcorder has some
mechanical fault.
slow
moisture condensation
has formed in the camcorder.
Action
Exchange it with a charged
one.
Exchange it with a charged
battery.
Prepare a new one.
Change to a new one.
Insert a tape.
Check the red tab,
on the tape.
1. Eject the tape.
2. Set to OFF
3. Detach the battery.
4. Reattach the battery.
* Please contact your local service
center if the problem continues.
see page 59.