All manuals and user guides at all-guides.com
Troubleshooting Check
Troubleshooting Check
Before contacting a service centre, perform the following simple checks.
They might save you the time and expense of an unnecessary call.
Self Diagnosis Display
Display
Blinking
Inform that...
slow
the battery pack is almost
discharged.
fast
the battery pack is fully
discharged.
the tape has almost reached
TAPE END
slow
its end.
TAPE END
no
the tape reached its end.
TAPE
slow
there is no tape in the camcorder.
the tape is protected
TAPE
slow
from recording.
D.EMG
slow
the camcorder has some
C.EMG
mechanical fault.
R.EMG
L.EMG
moisture condensation
DEW
slow
has formed in the camcorder.
ENGLISH
Action
Exchange it with a charged
one.
Exchange it with a charged
one.
Prepare a new one.
Change to a new one.
Insert a tape.
Check the red tab on the tape
is not pushed over the hole.
1. Eject the tape.
2. Set to OFF.
3. Detach the battery.
4. Reattach the battery.
* Please contact your local
service center if the problem
continues.
see page 62.
59