To Use The Battery Pack; Utilisation Du Bloc Batterie - Samsung SCW73 Owner's Instruction Book

8mm video camcorder
Table of Contents

Advertisement

ENGLISH
Preparing

To use the Battery Pack

How long will the battery last for recording?
Depends on how often you are likely to use the zoom
feature during recording.
Recharging the Battery Pack
1. Attach the battery pack to
the camcorder.
2. Connect the AC Power Adapter
1
to the AC cord and connect the
AC cord to a wall socket.
3. Connect the DC cable to the
DC jack of the camcorder.
4. Turn off the camcorder power,
and the recharging indicator
2
will start blinking and begin
recharging.
-
Blinking once a second :
Indicates less than 50%
has been charged.
-
Blinking twice a second :
Indicates 50% ~ 75% has
4
been recharged.
-
Blinking three times
a second : Indicates
75% ~ 100% has been
recharged.
-
Blinking stops and stays on :
Recharging has been completed.
-
On for a second and off for a second : Indicates
there is an error.
Reset the battery pack and DC cable.
5. If recharging is completed, separate the camcorder,
AC power adapter, and battery pack.
-
Even if the power is turned off, battery will be
discharged.
Note: Battery pack may be charged a little at the time of
purchase.
18
Réglage du caméscope

Utilisation du Bloc Batterie

Durée d'enregistrement
De la fréquence d'utilisation du zoom.
Par conséquent, disposez de plusieurs blocs.
Recharge du bloc batterie
1. Installez le bloc batterie sur le caméscope.
3
OFF
- s'il s'allume pendant une seconde et s'éteint pendant une
seconde, cela signifie qu'un incident s'est produit.
Réinitialisez le bloc batterie et le câble DC.
5. Si la batterie est entièrement chargée, retirez l'adaptateur
secteur et le bloc batterie du caméscope.
- La batterie se décharge, même lorsque l'alimentation
est coupée.
Remarque: le bloc batterie peut être déjà en partie chargé à
l'achat.
FRANÇAIS
2. Connectez l'adaptateur secteur
à un câble d'alimentation
et branchez ce câble sur
une prise murale.
3. Branchez le câble DC à la prise
DC du caméscope.
4. Éteignez le caméscope, le
voyant de charge se met alors
à clignoter et la charge
commence :
- s'il clignote une fois par
seconde, moins de 50 % de
la batterie a été rechargé ;
- s'il clignote deux fois par
seconde, 50 % à 75 % de
la batterie a été rechargé ;
- s'il clignote trois fois par sec-
onde, 75 % à 100 % de la
batterie a été rechargé ;
- si le voyant reste allumé, la
batterie est totalement
rechargée ;

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scw71

Table of Contents