Table of Contents
Advertisement
Cooling Your Room
10
E-
You must select the Cool mode if you wish to adjust the:
Cooling temperature
Fan speed when cooling
1
If necessary, press the
Result:
The OPERATION indicator on the indoor unit comes on.
The air conditioner starts up in the mode selected when
the unit was last used.
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
IM
IMPORTANT
prevent the unit from being damaged when it is started
immediately after being:
Plugged in
Stopped
It will start up normally after a three-minute.
2
If the
indication is not displayed at the top of the remote control,
press the
button on the remote control one or more times until it
appears.
Result:
The indoor unit beeps each time you press
The air conditioner starts up in Cool mode.
N N
o o
t t
e e
You can change modes at any time.
N N
o o
t t
e e
3
To adjust the temperature, press the
times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
Each time you press
- The temperature is adjusted by 1°C
- The indoor unit beeps
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature; the
fan will, however, operate.
4
Select the fan speed by pressing the
until the required setting is displayed:
Low
Medium
High
Automatic
Result:
Each time you press
5
To control the direction of the air flow, refer to page 14.
(On/Off) button.
or
buttons one or more
or
:
button one or more times
, the indoor unit beeps.
.
Hide quick links:
Advertisement
Table of Contents
