Table of Contents
Advertisement
Adjusting the Air Flow Direction Vertically
Adjusting the Air Flow Direction Horizontally
14
E-
Depending on the position of the indoor unit on the wall of your
room, you can adjust the position of the outer air flow blade on the
bottom of the unit, thus increasing the efficiency of the air
conditioner.
1
Press the
button under the remote control flap one or more times
as required.
Result:
The outer blade is adjusted vertically.
RECOMMENDATION
2
If you want the blade to move up and down automatically when the air
conditioner is operating, press the
Result:
The blade move up and down, around the base position set.
3
To stop the blade moving up and down, press the
N N
o o
t t
e e
If you switch the air conditioner... Then the blade is...
N N
o o
t t
e e
Off
On again
There are two sets of inner air flow blades. Just as the outer air flow
blade can be adjusted vertically, the inner blades can be adjusted
horizontally.
1
Open the air flow blade along the bottom of the indoor unit, by
pressing the
button.
2
To stop the blade moving up and down, press the
3
Adjust each set of inner blades to the required position, by pushing or
pulling them sideways.
When...
Adjust the blade to face...
Cooling
Upwards.
button.
Closed completely.
Reset to the position that you
previously selected.
button again.
button again.
Hide quick links:
Advertisement
Table of Contents
