Table of Contents
Advertisement
Remote Control
8
E-
Great user manuals database on
Cooling Your Room
Control Panel
UserManuals.info
You must select the Cool mode if you wish to lower the temperature in your
room. You can also set the fan speed.
1
If necessary, press the
Result:
The operating mode indicator (COOL or FAN) on
the unit comes on.
The air conditioner starts up in the mode selected
when the unit was last used.
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent
the unit from being damaged when it is started immediately after
being:
Plugged in
Stopped
It will start up automatically after about three minutes.
2
If the COOL indicator is not lit up on the unit:
Press the
or
Press the MODE button on the unit one or more times until the COOL
indicator lights up
Result:
The unit beeps each time you press MODE.
The air conditioner starts up in Cool mode.
You can change modes at any time.
3
To adjust the temperature, press the
control one or more times until the required temperature is displayed.
To adjust the temperature, press the
or more times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
Each time you press the temperature buttons:
– The temperature is adjusted by 1°C and
displayed on the control panel
– The unit beeps
The air conditioner starts cooling if the room temperature is
higher than the selected temperature.
4
To set the fan speed to...
High
Med
Low
Result:
Each time you press a button, the unit beeps.
5
To control the direction of the air flow, refer to page 10.
(On/Off) button.
button on the remote control
or
or
Then...
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
Press the
button on the remote control.
or
Press the
on the unit until the
indicator lights up
button on the remote
button on the unit one
Advertisement
Table of Contents
