Disc Operations; Playable Discs; Loading Discs; Basic Playback Controls - Philips FWM589/19 User Manual

IMPORTANT!
– This system is designed for regular
discs. Therefore, do not use any
accessories such as disc stabiliser rings or
disc treatment sheets, etc., as offered on
the market, because they may jam the
changer mechanism.
– Do not load more than one disc onto
each tray.

Playable discs

This system is able to play:
– All pre-recorded audio CDs
– All finalised audio CDR and audio CDRW
discs
– MP3-CDs (CD-ROMs with MP3 tracks)

Loading discs

Press OPEN•CLOSE 0 DISC 1 on top of
1
the main unit to open disc tray 1.
2
Load a disc with the label side facing up. For
double-sided discs, load the side you want to
play facing up.
Press OPEN•CLOSE 0 DISC 1 again to
3
close the disc tray.
➜ "READING" is displayed. The selected disc
tray, total number of tracks and the playing time
will appear on the display.
4
Repeat steps 1~3 for loading discs into the disc
trays 2~5 by pressing the corresponding
OPEN•CLOSE 0 DISC button.
Notes:
– To ensure good system performance, wait until
the disc trays completely read the disc(s) before
proceeding.
– Only one tray can be opened each time. If you
open the second tray before closing the first tray,
the first tray will automatically close before the
second tray opens.
(page 3 - P4)

Disc Operations

Basic playback controls

Load discs
(page 3 - P4).
To play all discs on the disc trays
● Press É Å .
OR
In stop mode, press CD to select a disc tray to
begin, then press É Å .
➜ All the available discs will play once, then stop.
To play the selected disc only
● Press one of the CD 1~5 buttons on remote.
➜ The selected disc will play once, then stop.
To select a desired track
● Press í or ë repeatedly until the desired
track is displayed.
➜ During random play (shuffle), pressing í will
not affect the current playback.
To search for a particular passage during
playback
● Press and hold à or á and release it when
the desired passage is located.
➜ During searching, the volume will be reduced.
For MP3 disc, the volume will be muted.
To change discs without interrupting
playback
● Press OPEN•CLOSE 0 of respective disc
trays (refer to "Loading discs").
For example, if currently disc tray 1 is playing,
you can change the discs on disc trays 2~5.
To interrupt playback
● Press É Å .
➜ To resume normal playback, repeat the
above.
To stop playback
● Press Ç.
➜ If the system remains in stop mode for 30
minutes, it will switch to Eco Power standby
mode.
19